NewStats: 3,263,835 , 8,181,565 topics. Date: Sunday, 08 June 2025 at 08:24 AM z2u58

xanie:


It's 2023 and I'll searching for this same track. What's the track title?

Gino - No be God?

Veew:


The charger is 14.6v 10amp, What kind of diode can i use and where can I get it from please?

A >10A Schottky diode like the MBRF20100CT. You need to mount it on a heatsink as it gets warm/hot when delivering current through it.

People made thousands of dollars simply by Tapping a Button on the device every 24hrs for couple of years, you call that joblessness?

How many taps make the texts you send on whatsapp with your friends that didn't earn you a kobo?

einsteine:


How much did you make?

Of course, for those who were jobless, it was probably a good venture. But if you had something doing, you will find it wasn't great ROI for your time.

And it will never be listed on Bybit. Maybe Binance as they list trash these days.

And the tokenomics is still bad.

Good luck to all concerned.

If the VENTURE WAS GOOD, then it isn't JOBLESSNESS!

Take your big L man!

einsteine:



You must be a foolish retard for that statement.

If I didn't feel like an idiot fading Hyperliquid, is it Pi I would be worried about?

The CEO of Bybit called Pi a scam just yesterday. That's the CEO of the third biggest crypto exchange.

This your response reeks of PAIN!

Agree you lost on this one.

Obnoxious2001:
Happy new year guys.

Please I have a question, if after you have coupled your cells, and there is a bad one, how do you find the particular cell that is causing the fault

I fully charge the pack, break all positive connection and let it sit for Hours or 1day, then test individual voltages.

occfx:


Depending what you mean, almost all electronics come from China and if you do the right thing you get the right result. Laptop charger is charging the lithium ion of the laptop and it's not burning out. Good buck converter with the right ratings and heat sink still delivers. Well, like I said, it depends on what you mean. If you don't do it wrong thing it won't work.

Well delivered.

officialfestus:
HNY man.
Is your charger connecting in series or parrell?

I don't use laptop charger, I use switching power supply blocks like ones attached.

ajabani4allah:


This won't last, those bulk converters are not that strong, both the charger and the converter will burn in no time when they are working at the peak of their current

You aren't suppose to run them at their peak. The setup works, it's what I use.

Simply, I prefer it to regular charger.

Merry Christmas to y'all. 🎄

Greater 2025 Ahead!

erniok:

You knew you were not comfortable and yet asked someone to stake? Smh.

The comfort was about the browser used not the games selected.

RealityKings:


You should have staked 20k instead of 10k

SPF247:

Abeg make una dey drop these games nah. Make the joy for go round.

Gbas Gbos all over here.

officialfestus:
I'm thinking of using a laptop charger and a 1200w boost converter.

That would work.

tetralogyfallot:
7s30p, 18650 lithium ion cells
Voltage: 25.9v
Capacity: 78Ah
Energy: 2kWh
Max continuous discharge current:156A
Pieces of 2.6A 18650 cells: 210pcs
Bms installed: 7S 80A 24v
Active balancer: 7S NMC/ LFP battery balancer v1.1

156A Continous discharge on a 30P build? How do you protect your cells?

officialfestus:
Good morning bosses.
Please I need a diy process on how to build a 24v 7s lithium ion battery charger, as getting the already made is too costly.
Cc penuelseun, valto, dollarnaira, ewizard1

Get a power supply and CCCV converter. That's the cheapest you can get.

officialfestus:
My 12v 3s 100ah for my indoor and outdoor powers power station just got completed this morning with.

100ah one way bms with ive balancer.
2a 3s active balancer.

Happy birthday 🎂 to me.

Happy Birthday Bro.

Personally, I strongly recommend "Active Balancer" for builds as much as 100Ah.

tchijioke:
Good evening all,
Has anyone connected these lithium phosphate batteries in series

Did the manual say you can?

mangolpupa:


Alright. Which of the market please?

Check Arena Oshodi.

mangolpupa:


Thanks boss. 1500w would be too much for the application. 500w or 700w should be adequate. What is the name of the tokunbo market?

You won't get a PSW 700w UPS. The APC 1500VA is the least you can.

mangolpupa:
My people, I am looking for tokunbo uninterrupted power systems (UPS) system with pure sine wave output. Is there a used tokunbo market for it in lagos? If yes, does anyone have a sure plug.

Get the APC 1500VA UPS, it's Pure Sine Wave and should be available in the tokunbo market.

dollarnaira:


Brand new?

Brand new Samsung 18650 cell for N1800?

2000+ mah Capacity tested Samsung cells available.

Max available - 50pcs
Price - N1800 per cell.
Location - Lagos

officialfestus:
Good evening to y'all.
Please why is the first connection in this video wrong?
Cc penuelseun dollarnaira ewizard1
https://youtube.com/shorts/6roZMISf79Q?si=zo4drcrN2xA_zILj

The first connection is correct. SPD is looped with Solar input on the MCB not output.

obinna37:
your number

234 8I4 896 6464

obinna37:
ok, one love

Whatsapp me if you're still interested.

obinna37:
I'm not a seller ooo,I b end-

But you dey sell stuffs I know.

Anyway... na 45k last.

obinna37:
35k

Oga!!! How much you dey sell new one?

Trippledots:


A quick hack to the dust issue could be just lying the stab on it's side rather than standing it upright. That is if the heavy coils are well secured inside for that orientation though.

That way dust would take a very long time to settle in the surfaces.

Not advisable.

Wizyoung:
Please, anyone who has lithium Spot-welding tool for sale, kindly quote me.

I want to start building lithium walls like my bosses dollarnaira , officialfestus , pennuel (not sure I got that right) and others whose name is a tremendous task to spell out

Any local (Nigerian) source to buy reliable lithium cells will be appreciated.

You can DIY a spot welder.

Wizyoung:


Yes boss, like placing two or more cells side by side and soldering the metallic connection at the top and button of the cells

You need cell holders first. Then welding.

For welding, you could either go for soldering or spot welding. You can get away with soldering the negative side but extreme care and right tools is required to solder the Positive side.