NewStats: 3,265,513 , 8,187,040 topics. Date: Sunday, 15 June 2025 at 12:52 PM 2q3z50

https://www.youtube.com/watch?v=Wh5qnLlm3m0

My ATFLY Charm1 hangs like bad. what to do? any solution? Browsing on java phone is faster than on my charm1. Pls help

archbishop007:
my fellow engineers in the house pls Im in need of s8 plus
board

i get am o

Easychamp:
My phone fell inside soapy water unknowingly for quite some time, what can be done to it, and is it fixable?

It's 50/50 chance it would work

Please how can I rectify this problem. I can't browse because where u have data is not working

KBKoncept:
Searching for a competent engineer to fix your smartphone with no hassles?
Worryless, as we are here to serve you best.
We are in the heart of Lagos, Ikeja.
Come and experience the best engineer you can ever imagine.

For more details Call: 08062101426
WhatsApp: 08062101426

Address: Awolowo House(Glass House) RollinTech Store
Ikeja, Lagos

chuksvoice:

It's 50/50 chance it would work

Thanks so much, I will give it a try

Pimpmaride:


Lo..

Just find a way to send it to naira Marley...


King of soapy

Na to use am collect new one from him b dt

Easychamp:

Na to use am collect new one from him b dt

Naso

Does anyone here know how to flash infinix hot 4, the phone will not boot but it is switching on?

Lanretoye:
i get am o

baba chat me up on 07065829510 or you DM your price

pacespot:
Does anyone here know how to flash infinix hot 4, the phone will not boot but it is switching on?

I can flash it for you. Chat me up on WhatsApp 08082409934

Pls I just bought camon 15, is less than a week but the issue is that is showing earpieces while there is none, is not allowing the phone to ring or make calls without putting on speaker , not even wireless Bluetooth. I took to carlcare the don't even know what to do after doing factory reset.

Pls I need advice on what to do. Can't the factory change it for me.

How we solve this.

Engineer pls help

odyx:
Pls I just bought camon 15, is less than a week but the issue is that is showing earpieces while there is none, is not allowing the phone to ring or make calls without putting on speaker , not even wireless Bluetooth. I took to carlcare the don't even know what to do after doing factory reset.

Pls I need advice on what to do. Can't the factory change it for me.

How we solve this.

Engineer pls help

Wetin nna dey see for all dis china phones,stay away from china phones nna no go hear,it comes with unbearable headache.

odyx:
Pls I just bought camon 15, is less than a week but the issue is that is showing earpieces while there is none, is not allowing the phone to ring or make calls without putting on speaker , not even wireless Bluetooth. I took to carlcare the don't even know what to do after doing factory reset.

Pls I need advice on what to do. Can't the factory change it for me.

How we solve this.

Engineer pls help

this issue is commonly associated with the sub board,if it is being disconnected from the main board and the issue is resolved then you should just replace the sub board.but first check is there is nothing blocking the earpiece port.
Moreover that phone should still be on warranty and from what I know,carlcare should be responsible unless you didn’t buy it new.

Hello fellow nairaland phone engineers in this thread, I have a Samsung Galaxy S3 with communication problem. When I dial to make call, it rings at the other end (at the receiver's phone) but when we start communicating, we don't hear each other. What can be the cause of this problem and how can I rectify it.
Is this a code problem? Please help. A million thanks in advance.

My brother that phone has expired

Lipso:
Hello fellow nairaland phone engineers in this thread, I have a Samsung Galaxy S3 with communication problem. When I dial to make call, it rings at the other end (at the receiver's phone) but when we start communicating, we don't hear each other. What can be the cause of this problem and how can I rectify it.
Is this a code problem? Please help. A million thanks in advance.

Lipso:
Hello fellow nairaland phone engineers in this thread, I have a Samsung Galaxy S3 with communication problem. When I dial to make call, it rings at the other end (at the receiver's phone) but when we start communicating, we don't hear each other. What can be the cause of this problem and how can I rectify it.
Is this a code problem? Please help. A million thanks in advance.

Ahan S3? How far now?!!

Bury the phone with full honours plis!

Repairguru:
I can flash it for you. Chat me up on WhatsApp 08082409934

3 engineers have tried to flash the phone but couldnt get the right file for it. just so you know. do you have a lot of files to try on the phone? where is your location?

just yesterday my Tecno L9plus started working very very slow.
Even to ype this message I have to spend several minutes

Evething thing is like in a slow motion. And also Any time I off the phone and restart it, it will show me this rebooting or restore factory options. I have to keep on Trying before it will be ON. And it will still be slow again.

Please how can I fix it?

Lanretoye:
is your Bluetooth and WiFi still working?,if yes then the tristar/charging ic needs to be changed.

Can you refer me to someone who can change this in Port Harcourt

Lanretoye:
this issue is commonly associated with the sub board,if it is being disconnected from the main board and the issue is resolved then you should just replace the sub board.but first check is there is nothing blocking the earpiece port.
Moreover that phone should still be on warranty and from what I know,carlcare should be responsible unless you didn’t buy it new.

I took to them but they did smart one on it,and convert the phone to techno CD 6 but still issues are there. I will go make case on Monday

Good evening all. Please who can assist urgently. My mums phone just suddenly started showing this on its screen.

She can’t dial nor receive calls. When trying to call it says your call has been diverted to one or more numbers.

Please how do we resolve this ?

Phone is Samsung J4.

Thanks

maryTeee:
Good evening all. Please who can assist urgently. My mums phone just suddenly started showing this on its screen.

She can’t dial nor receive calls. When trying to call it says your call has been diverted to one or more numbers.

Please how do we resolve this ?

Phone is Samsung J4.

Thanks

Is the phone UK used? If yes, it might have locked again oh

Jung:


Is the phone UK used? If yes, it might have locked again oh

Not at all. It was bought brand new just last year.

maryTeee:
Good evening all. Please who can assist urgently. My mums phone just suddenly started showing this on its screen.

She can’t dial nor receive calls. When trying to call it says your call has been diverted to one or more numbers.

Please how do we resolve this ?

Phone is Samsung J4.

Thanks

Check under settings where you have sim cards options, check whether it's locked, then toggle to open it

cluewebhost:


Can you refer me to someone who can change this in Port Harcourt

unfortunately no,it’s not a big deal here in Lagos.

maryTeee:
Good evening all. Please who can assist urgently. My mums phone just suddenly started showing this on its screen.

She can’t dial nor receive calls. When trying to call it says your call has been diverted to one or more numbers.

Please how do we resolve this ?

Phone is Samsung J4.

Thanks

Dial *#06# to see if imei is still showing.

Informer155:
just yesterday my Tecno L9plus started working very very slow.
Even to ype this message I have to spend several minutes

Evething thing is like in a slow motion. And also Any time I off the phone and restart it, it will show me this rebooting or restore factory options. I have to keep on Trying before it will be ON. And it will still be slow again.

Please how can I fix it?

Check if memory is low or maybe hard reset should solve that.

Lanretoye:
Dial *#06# to see if imei is still showing.

Yes it’s showing. What can I do please. Thanks

maryTeee:

Yes it’s showing. What can I do please. Thanks

try to reset network settings or better still do hard/factory reset.