NewStats: 3,264,933 , 8,185,131 topics. Date: Thursday, 12 June 2025 at 08:44 PM 3d2o4n

Pls . Who can help me with a really good bmw electrician on the island

Ivan18888888888:
Pls . Who can help me with a really good bmw electrician on the island

if las las you find one and they do not have a basic scanner dont let them open your car hood.

So nobody has a good bmw electrician on the island ? And we’ll call this a bmw car forum ?

[quote author=735i post=112077118]

Hello bro
It’s me again
Pls with all respect intended .
Could you possibly recommend for me the required engine oil for bmwx6 2010 i35 .

Thanks for your response in advance

[quote author=Ivan18888888888 post=113006586][/quote]

Castrol or Motul. 5w-30 is recommended. If you can, come around tomorrow morning, the session and meet other owners of Bavarian machines.
It's a free session, and you can get your car checked out for free with a proper BMW scan tool too (For free).

What is the best car scanner (personnal use) one can buy for for a bmw E90

Cc chukel
Cc drakeskull
Cc erico2k2

Cvesta:
What is the best car scanner (personnal use) one can buy for for a bmw E90

Cc chukel
Cc drakeskull
Cc erico2k2

Icarsoft
Inpa

chukel:

Icarsoft
Inpa

Thanks

Cvesta:

Thanks

reach out if you need inpa

I need a very good BMW mechanic in Lagos/Festac area

chukel:
reach out if you need inpa

How much

Ivan18888888888:
So nobody has a good bmw electrician on the island ? And we’ll call this a bmw car forum ?

where are you on the island

MOTIONTECH:
where are you on the island

I’m everywhere on island . As far as the referral is a professional One . I am open to meet at any given location.

Note : Only extreme professional bmw electrician is needed pls !!!

Ivan18888888888:


I’m everywhere on island . As far as the referral is a professional One . I am open to meet at any given location.

Note : Only extreme professional bmw electrician is needed pls !!!

i know one in Ebutte Metta, if you dont mind

lahome:
I need a very good BMW mechanic in Lagos/Festac area

lahome:
I need a very good BMW mechanic in Lagos/Festac area

Which of the Beemar do you wish to fix

mayor2013:


Which of the Beemar do you wish to fix

X6

lahome:



X6

You can call the garage on 08165520837 between working hours

mayor2013:


You can call the garage on 08165520837 between working hours

Thanks

chukel:

Icarsoft
Inpa

2007 bmw 328i E90 available for sale ( upgraded to 2010) N2.250m(neg), Location is Ikeja
Call 09098675427

Hi everyone,
I want to know if there is anything like over supply of fuel by the nozzle causing incomplete combustion. The issue is, the rate of fuel consumption has now tripled and the engine doesn't fire down and sometimes misfire.

What could be the cause of this? The mecho I gave was saying over supply of fuel by the nozzle. If that is true. Where can I get a clean tokubo nozzles of that specifications?

Thanks.

Hi everyone.. nice to be here, i drive an accord cl7 (manual tranny) but wish to a bmw.. there is this e46 325ti (pic is attached) bm direct toks deal i saw for 1.3m, i test drove it and the problems i found was it didn't accelerate well and when i put it on D and remove my leg frm the brake, the car will be jerky until i press d gas pedal wch actually don't respond well untill i have accelerated far enough.. when in neutral, the engine will be jerky. Aside these issues, the car is very clean.

1) what could be the issue?
2) can it easily be solved?
3) how much is the 2.5l m54 engine?
4) can i swap the 2.5l to a 3.0l in the future if i choose to?

dante4845:
Hi everyone.. nice to be here, i drive an accord cl7 (manual tranny) but wish to a bmw.. there is this e46 325ti (pic is attached) bm direct toks deal i saw for 1.3m, i test drove it and the problems i found was it didn't accelerate well and when i put it on D and remove my leg frm the brake, the car will be jerky until i press d gas pedal wch actually don't respond well untill i have accelerated far enough.. when in neutral, the engine will be jerky. Aside these issues, the car is very clean.

1) what could be the issue?
2) can it easily be solved?
3) how much is the 2.5l m54 engine?
4) can i swap the 2.5l to a 3.0l in the future if i choose to?

1)Check the coils, plugs, fuel filter etc. It could be any of the sensors too. You could easily scan the car to put the issues in proper perspective.

2) possible. Check all the items stated above...

3)

4) 100% possible. You'll be getting yourself a little fast car.

Good morning brothers. Please I’m about to buy a BMW 550i GT , 2012 model. Please are there reservations to the v8 engines of bmw or I should proceed. I like the car gan but I don’t want to carry something my mind will be shaking when I’m inside. Please your opinions will be really helpful. Bless y’all

muhamm3d:
Good morning brothers. Please I’m about to buy a BMW 550i GT , 2012 model. Please are there reservations to the v8 engines of bmw or I should proceed. I like the car gan but I don’t want to carry something my mind will be shaking when I’m inside. Please your opinions will be really helpful. Bless y’all

Please avoid the V8. Was garbage until the TU revision in 2014.

Much better off with the N55.

HeavenlyBang:


Please avoid the V8. Was garbage until the TU revision in 2014.

Much better off with the N55.

Thanks bro and God bless

yungboss:


1)Check the coils, plugs, fuel filter etc. It could be any of the sensors too. You could easily scan the car to put the issues in proper perspective.

2) possible. Check all the items stated above...

3)

4) 100% possible. You'll be getting yourself a little fast car.

Tnx man.. really appreciate

daylay7:
Hi everyone,
I want to know if there is anything like over supply of fuel by the nozzle causing incomplete combustion. The issue is, the rate of fuel consumption has now tripled and the engine doesn't fire down and sometimes misfire.

What could be the cause of this? The mecho I gave was saying over supply of fuel by the nozzle. If that is true. Where can I get a clean tokubo nozzles of that specifications?

Thanks.

Check the quality of your Engine airfilter , check your MAF sensor

mafioso47:
Check the quality of your Engine airfilter , check your MAF sensor

The MAF sensor is good but the airfiloter is fair. Could that be the reason for line 1 of the engine not working? I have grown tired of the issue and I spent alot on it as well. So, I have changed it to inline 6 engine (double vee).

daylay7:


The MAF sensor is good but the airfiloter is fair. Could that be the reason for line 1 of the engine not working? I have grown tired of the issue and I spent alot on it as well. So, I have changed it to inline 6 engine (double vee).

MAF(Mass Air Flow) = Air Flow Meter

benefitzte:


MAF(Mass Air Flow) = Air Flow Meter

Im sorry for the typo error. I meant the same too.

dante4845:
Hi everyone.. nice to be here, i drive an accord cl7 (manual tranny) but wish to a bmw.. there is this e46 325ti (pic is attached) bm direct toks deal i saw for 1.3m, i test drove it and the problems i found was it didn't accelerate well and when i put it on D and remove my leg frm the brake, the car will be jerky until i press d gas pedal wch actually don't respond well untill i have accelerated far enough.. when in neutral, the engine will be jerky. Aside these issues, the car is very clean.

1) what could be the issue?
2) can it easily be solved?
3) how much is the 2.5l m54 engine?
4) can i swap the 2.5l to a 3.0l in the future if i choose to?

Oga If u never buy this car ... run for your life !