NewStats: 3,265,479 , 8,186,865 topics. Date: Sunday, 15 June 2025 at 07:35 AM 3r6o1o

Joe4lv:


Ok Boss.

I gave someone your number 2 weeks ago to help him get Highlander or RX in Onitsha.

[img]https://media1./images/31360b54a312e0d7903b5535c23c1c6e/tenor.gif?itemid=13625282[/img]

Good Morning Guys, I was asked to consider changing my oil from Mobil 5w-30 Super 2000 to Mobil XHP. The reason is mainly because its kind of difficult getting the 5w-30 here. It isn't readily available probably due to high demand or just scarcity of some reason. What do you guys think? Is there another recommendation I could consider? I use a Toyota Camry 2005 v6 Car. Thanks for your suggestion.

PrinceFola:
Please help!!!

I had this challenge in March, as it turned out, I learnt the oil I bought for servicing was adulterated and I haven't driven more than 2k miles. I had to change my oil.

chrisja:
Good Morning Guys, I was asked to consider changing my oil from Mobil 5w-30 Super 2000 to Mobil XHP. The reason is mainly because its kind of difficult getting the 5w-30 here. It isn't readily available probably due to high demand or just scarcity of some reason. What do you guys think? Is there another recommendation I could consider? I use a Toyota Camry 2005 v6 Car. Thanks for your suggestion.

Buy the American spec

Call 08033910382

Hello Oga Gazzuzz, Good day and Happy Sunday.

I recently changed three of the tires in my Toyota Camry 2011, it’s not been up to a week. Everything has been fine until I drove out to the express today and the low pressure light came on in the dashboard. I drove to a nearby vulcanizer who confirmed all the tires are full, I asked him what pressure is in them he said 45(I guess he means 45 psi) in all the tires. We tried to figure what the issue is to no avail, I asked him to reduce the pressure to 40psi which he did on all 4 wheels yet the light didn’t go.

I checked online and the recommended pressure is 32PSI for the tire(215/60R16), so I asked him to reduce it further, he said it will be very low, so I left it like that.

Could his be a tire issue?
is the pressure too much?
could this be a pressure sensor issue?
Or could it be the replacement tires (tokunbo) were not fixed properly?

I would highly appreciate your input please Oga Gazzuzz. Thanks a lot.

.

themonk:
Hello Oga Gazzuzz, Good day and Happy Sunday.

I recently changed three of the tires in my Toyota Camry 2011, it’s not been up to a week. Everything has been fine until I drove out to the express today and the low pressure light came on in the dashboard. I drove to a nearby vulcanizer who confirmed all the tires are full, I asked him what pressure is in them he said 45(I guess he means 45 psi) in all the tires. We tried to figure what the issue is to no avail, I asked him to reduce the pressure to 40psi which he did on all 4 wheels yet the light didn’t go.

I checked online and the recommended pressure is 32PSI for the tire(215/60R16), so I asked him to reduce it further, he said it will be very low, so I left it like that.

Could his be a tire issue?
is the pressure too much?
could this be a pressure sensor issue?
Or could it be the replacement tires (tokunbo) were not fixed properly?

I would highly appreciate your input please Oga Gazzuzz. Thanks a lot.

Probably one of the 4 tpms is faulty,a scanner capable of communicating with tpms would reveal the defective pressure sensor.

Alba3:


I really appreciate this.

Sorted?

themonk:
Hello Oga Gazzuzz, Good day and Happy Sunday.

I recently changed three of the tires in my Toyota Camry 2011, it’s not been up to a week. Everything has been fine until I drove out to the express today and the low pressure light came on in the dashboard. I drove to a nearby vulcanizer who confirmed all the tires are full, I asked him what pressure is in them he said 45(I guess he means 45 psi) in all the tires. We tried to figure what the issue is to no avail, I asked him to reduce the pressure to 40psi which he did on all 4 wheels yet the light didn’t go.

I checked online and the recommended pressure is 32PSI for the tire(215/60R16), so I asked him to reduce it further, he said it will be very low, so I left it like that.

Could his be a tire issue?
is the pressure too much?
could this be a pressure sensor issue?
Or could it be the replacement tires (tokunbo) were not fixed properly?

I would highly appreciate your input please Oga Gazzuzz. Thanks a lot.

You will need a scan tool to measure air pressure battery levels and transmitter signal.

Kewtt:

Sorted?

Haven't gone back yet but vehicle is still there; couldn't take the risk of driving a vehicle that could shut off in traffic.

GAZZUZZ:


You will need a scan tool to measure air pressure battery levels and transmitter signal.

Hello Oga Gazzuzz these are the codes generated.
Please what should I do?

double3:

Probably one of the 4 tpms is faulty,a scanner capable of communicating with tpms would reveal the defective pressure sensor.

Hello bro this is the code generated. Thanks.

themonk:


Hello Oga Gazzuzz these are the codes generated.
Please what should I do?

I am not familiar with the codes displayed.

Pls enter live scan , and view tyre pressures

GAZZUZZ:


I am not familiar with the codes displayed.

Pls enter live scan , and view tyre pressures

Okay, I just did that but I don’t know which one exactly if for tire pressure so I snapped all.

GAZZUZZ:


I am not familiar with the codes displayed.

Pls enter live scan , and view tyre pressures

Continued...

Hailings to the bosses in the house, my car horn has been going on and off for a few days now... Is it something i can rectify by myself, if yes, kindly guide me on how to go about it. It's a 2010 civic.

Thanks

Cc: Gazzuzz - kingreign - nurey

themonk:

Okay, I just did that but I don’t know which one exactly if for tire pressure so I snapped all.

This scan tool cannot connect to TPMS of any vehicle

hypernikao:
Hailings to the bosses in the house, my car horn has been going on and off for a few days now... Is it something i can rectify by myself, if yes, kindly guide me on how to go about it. It's a 2010 civic.

Thanks

Cc: Gazzuzz - kingreign - nurey

usually the culprit.

It is not DIY

GAZZUZZ:


This scan tool cannot connect to TPMS of any vehicle

Thanks bro, I will take it for a proper scan soon. I hope it is not an issue that needs urgent attention.

Radautoworks, I bought this scan tool at your office this year, can I add money and get a better one or will you give me a free scan

Thanks boss, what's the name of this thing so i can ask the mechanic to check it.

GAZZUZZ:


usually the culprit.

It is not DIY

hypernikao:
Thanks boss, what's the name of this thing so i can ask the mechanic to check it.

ASE name is clockspring, zeemy name is horn control

OK boss!!!
Thanks

GAZZUZZ:


ASE name is clockspring, zeemy name is horn control

themonk:


Thanks bro, I will take it for a proper scan soon. I hope it is not an issue that needs urgent attention.

Radautoworks, I bought this scan tool at your office this year, can I add money and get a better one or will you give me a free scan

Okay. Show them this.

GAZZUZZ:


ASE name is clockspring, zeemy name is horn control

radautoworks:


Okay. Show them this.

Thanks I really appreciate, I will be at your office on or before weekend.

hypernikao:
Hailings to the bosses in the house, my car horn has been going on and off for a few days now... Is it something i can rectify by myself, if yes, kindly guide me on how to go about it. It's a 2010 civic.

Thanks

Cc: Gazzuzz - kingreign - nurey

Spiral clock spring bad. Don't attempt giving this job to a quack or else, your SRS airbag could deploy or some other electrical malfunction could occur.

Gurus in the house . I realised that my exhaust vibrates loudly when i put my car in reverse. It's a 2012 Toyota Camry LE. 4cyl

Who can advise on the cause and remedy?

Good evening chief Gazzuzz, I have a Camry 2007 Le. It recently brought up the check engine light and I did a scan with the following result. P0139, P0136 and C1241. Below is the pics attached. Pls what's the possible solutions.

Also pls is it okay for me to use the Mobil 5w-30 oil for servicing?

Musabua:
Good evening chief Gazzuzz, I have a Camry 2007 Le. It recently brought up the check engine light and I did a scan with the following result. P0139, P0136 and C1241. Below is the pics attached. Pls what's the possible solutions.

Also pls is it okay for me to use the Mobil 5w-30 oil for servicing?

Ignore the C code. Replace the O2 sensor .

5w30 can be used if that is what you have been using .

If you have not been using 5w30, kindly pour 20w50. Drain intervals 2-3k miles

Nice work here GAZZUZZ

[s]

radautoworks:


Okay. Show them this.

[/s]Shut up!

Yahoo mechanic

Mobil 1 10W-30 High Mileage Advance Full Synthetic Motor Oil-1 Quart. How many of these 1 Quart do i need for my Toyota corolla 2005 to be gauge in when doing service?