NewStats: 3,264,174 , 8,182,865 topics. Date: Tuesday, 10 June 2025 at 02:55 AM 3g105q

First, the console power indicator is not lit

the reason:

1. The power supply of the charcoal machine is not connected;

2. The fuse is blown;

3. The indicator light is broken.

Corrective Action:

1. Connect the charcoal machine power cord;

2. Replace the fuse;

3. Replace the indicator light.

Second, the charcoal molding machine motor does not start

the reason:

1. The control button of the charcoal machine is damaged;

2, lack of one phase;

3. Voltage and frequency do not match.

Corrective Action:

1. Replace the control button of the [url]sawdust charcoal briquette machine[/url]http://www.charcoal-machines.com/sawdust-charcoal-briquette-production-line;

2. Connect the power cord;

3. Check the voltage frequency.

Third, the heating temperature rises slowly to less than 350 degrees

the reason:

1. The power supply voltage of the charcoal machine is low;

2. The resistance heating coil of the charcoal molding machine is damaged;

3. When the charcoal machine replaces the heating coil wire, the model is incorrect.

Corrective Action:

1. Check the voltage of the charcoal machine;

2. Replace the resistance heating coil of the charcoal machine;

3. Replace the charcoal machine wires as required.

The[url] carbonization furnace[/url]http://www.charcoal-machines.com/continuous-carbonization-furnace.html is equipped with an advanced filter to quickly decompose the moisture and tar from the smoke to achieve a smoke-free and environmentally friendly effect. The working principle of the [url]carbonization furnace[/url]http://www.charcoal-machines.com/continuous-carbonization-furnace.html is to use the self-produced gas furnace as the heat source, and the methane gas is used to through the cyclone, and the air is introduced into the burner. The outlet temperature of the burner can reach 800 ° C to 1200 ° C, and the flow rate can reach 3 to 5 meters per second. The generated high-temperature airflow is heated in the periphery of the combustion chamber. It should be noted that when heating, the furnace temperature is between 100 ° C and 150 ° C, which is the maximum moisture in the furnace. When the raw material rod is put into the kiln, 4 to 8% of water is brought into the furnace. 1700kg of raw materials can bring more than 100 kilograms of water. These waters are the enemy of carbonization. Because the mechanism carbon rods are most afraid of moisture, the water is pulverized into powder, which seriously affects the quality of carbonization. Therefore, the moisture removal system is essential. The key is that the tidal time is 1 to 1.5 hours. When the temperature in the carbonization chamber rises to 300 °C, a large amount of flammable gas is generated in the furnace. Each kilogram of raw material theoretically produces three cubic methane gas, which can be carbonized. Heating, drying heat source, the temperature of the furnace can be adjusted at will, low temperature carbon is generally above 400 ° C, 8 hours can be completed; high temperature carbon is more than 600 ° C, 10 hours to complete.

The mechanism [url]sawdust charcoal briquette machine[/url]http://www.charcoal-machines.com/sawdust-charcoal-briquette-production-line industry is gradually becoming a leader in the energy conservation and environmental protection industry, because the mechanism produced by the mechanism of sawdust charcoal briquette machine equipment is non-polluting and high-efficiency, and has a tendency to replace coal resources. The charcoal industry has developed rapidly in recent years. The production process of various equipments of charcoal machines has reached a certain international standard. On the basis of absorbing domestic advanced technology in the same industry, a new type of crusher has been developed and designed. It proves that the difficult problem of the crusher has been broken, and all the performance indicators have reached the technical requirements of the national machinery production quality.

  The biggest feature of the mainframe is that it consumes less power, has high productivity, less noise pollution, high stability, and is equipped with a water-cooling device, which prolongs the production time and greatly improves the efficiency. The internal design of the machine is made by fixed knives, moving knives through running and high airflow impact and self-grinding of fixed knives. The spindle rotor is balanced by finishing, and the net balance adjustment avoids the entanglement of pulverized materials. The amplitude reduces the power consumption, so that the feed rate is above 8 to 10 kg per minute, the comminution rate is increased by 40%, and the mobilization is reduced to 35%. The pulverizer charcoal machine equipment is equipped with automatic feeding and bagging setting, which realizes the simple and convenient operation, and the labor intensity of the worker is greatly reduced.

The coated [url]peanut roaster equipment[/url]https://www.nuts-machine.com/Products/12.html developed by our company adopts microwave low-temperature baking technology, which is widely used in baking of spiced peanuts, southern milk peanuts, salted peanuts, original peanuts, alcoholic peanuts and so on. The wrapped peanuts baked by the microwave baking equipment have a crispy taste and a strong aroma.

Microwave baking technology is a high-frequency electromagnetic wave emitted by a microwave generator, which causes the polar molecules of the material to generate hundreds of millions of collisions and frictions per second to generate heat. The heating method is to simultaneously heat the inside and outside of the material. The moisture contained in the water will migrate from the inside to the surface in an instant with the action of the microwave electromagnetic field. The physical structure of the material will change to a certain extent, making the whole material loose, so that the taste is crisp when eaten.

The traditional method is to heat and bake the wrapped peanuts by means of heat conduction. The surface of the material is slowly baked and matured from the surface to the inside. The surface is exposed to heat radiation for a long time. The baked peanuts are baked and the taste is hard. The method of baking by the heat conduction method has a long internal heating time, and it is difficult to discharge the water in a short time, so that the heating and baking are not uniform.

Special features of microwave wrapped [url]peanut roaster equipment[/url]https://www.nuts-machine.com/Products/12.html:

The basic properties of microwaves usually appear as three characteristics of penetration, reflection and absorption. For glass, plastic and porcelain, the microwave is almost traversed without being absorbed. For water and food, it absorbs microwaves and heats itself. For metal things, microwaves are reflected.

Penetration

Microwaves have longer wavelengths than other electromagnetic waves used for radiant heating, such as infrared rays and far infrared rays, and thus have better penetration. When the microwave penetrates into the medium, the temperature of the medium is increased due to the loss of the medium, so that the inside and the outside of the dielectric material are heated at almost the same time to form a body heat source state, which greatly shortens the heat conduction time in the conventional heating, and the condition is the dielectric loss factor. When the temperature is negatively correlated with the medium temperature, the heating inside and outside the material is uniform.

Selective heating

The ability of a substance to absorb microwaves is mainly determined by its dielectric loss factor. A substance having a large dielectric loss factor has a strong ability to absorb microwaves. On the contrary, a material having a small dielectric loss factor has a weak ability to absorb microwaves. Due to the difference in the loss factor of each substance, microwave heating exhibits selective heating characteristics. Different substances have different thermal effects. The water molecule is a polar molecule with a large dielectric constant, a large dielectric loss factor, and a strong absorption capacity for microwaves. The dielectric constant of proteins, carbohydrates, etc. is relatively small, and its absorption capacity for microwaves is much smaller than that of water. Therefore, for food, the amount of water content has a great influence on the microwave heating effect.

Small thermal inertia

The microwave material is instantaneously heated and the energy consumption is also low. On the other hand, the output power of the microwave can be adjusted at any time, the temperature rise of the medium can be changed without inertia, and there is no "remaining heat" phenomenon, which is very beneficial to the needs of automatic control and continuous production.

For those who have a certain understanding of the charcoal production machine, they all know that if they want to produce a qualified mechanism charcoal, they must master the operation skills of the equipment and the experience of charcoal production. In fact, many people do not know how to use the rod making mechanism. The secret. As long as you master this secret, you don't have to worry about the production mechanism charcoal, and the success rate is greatly improved. So what kind of secret is it?

Secret one charcoal production mechanism rod machine propeller must be reformed

The key to a successful stick is that the charcoal production mechanism must be welded before the rod propeller can be used. The directly produced propeller can not be produced without welding and repairing. The low-cost propeller you purchased directly on a treasure is only A shovel can't be used without reform. The place of welding is the process of reforming the propulsion head. The charcoal production machine manufacturers need to repair the propellers one by one before they can be sent to the customers. Therefore, they can still be made without welding. At present, most of the low-cost propellers sold on the online store are unreformed and cannot be used at all. Most s may not know it yet.

Don't buy cheap scrap iron, and delay production of charcoal. At present, depending on the model of the rod making machine, the size and repair method of the propeller are slightly different. The 50-type rod making machine adopts the 490mm propeller, and the 80-type rod making machine belongs to the large rod making machine, using the 520mm propeller, and of course other The size of the propeller, due to the small demand on the market and the low frequency of use, is not recommended for s.

Secret two charcoal production mechanism rod machine thruster replacement and repair

The [url]Charcoal briquette machine[/url]http://www.charcoal-machines.com/charcoal-briquette-production-line propeller is an important part of the charcoal production mechanism rod machine, because it is a loss product that must be replaced or repaired after a period of time to not affect the quality of the rod. Under normal use, the [url]Charcoal briquette machine[/url]http://www.charcoal-machines.com/charcoal-briquette-production-line propeller should be replaced after about 12 hours. For example, if you have two pairs of shoes, you can wear them for a longer period of time. If you wear them all the time, the wear will be very fast. It is more expensive to wear than to wear a pair of shoes. The same is true for the stick machine. Some raw materials are more complicated in texture, and the wear on the propeller is more serious. It may take a shorter time to remove the repair (the wear resistance and heat resistance of the electrode used in the repair may also affect the use time). The wear of the front end of the propeller is less than 4 mm; the diameter of the inner hole of the finished rod is less than 15 mm; the spiral portion of the propeller is worn due to foreign matter such as iron, nails or the like. If the wear is more serious, it needs to be replaced, and a new propeller is used to ensure the quality of the carbon rod produced.

The above are the two secrets of being able to produce a good salary bar. s want to produce good mechanism charcoal, and can refer to these operations, so that the quality of the produced charcoal will be more stable and the quality will be improved.

The mechanism charcoal is artificial charcoal which is made from agricultural and forestry residues (agricultural and forestry product waste) as raw materials and mechanically extruded and de-cigarized. It has the advantages of long burning time, strong firepower, smokelessness, odorlessness, and no blooming phenomenon during combustion. According to the inspection of authoritative departments, the physical and chemical indicators of artificial carbon are superior to those of natural burning charcoal.


With the deepening of social development, the amount of industrial carbon is increasing. To protect forestry resources, the State Council clearly stipulates that wood charcoal is not allowed, and charcoal is used as raw material. The manufacturers are mostly in a state of suspension or semi-discontinuation. After the charcoal machine and [url]Continuous carbonization furnace[/url]http://www.charcoal-machines.com/continuous-carbonization-furnace-2.html entered the society, it effectively alleviated the situation of tight supply of charcoal.


Wide product sales: a medium-sized industrial silicon plant requires more than 10,000 tons of carbon per year. Activated carbon, silicon carbide, crystalline silicon, carbon disulfide, thermal insulation materials, and smelters all require a large amount of charcoal. Charcoal has been in short supply and exported. The amount is constantly increasing.

http://www.charcoal-machines.com/continuous-carbonization-furnace.html

The food roaster machine adopts the latest microwave technology and is applied to the food baking field. The microwave [url]peanut roaster machine [/url]https://www.nuts-machine.com/Products/12.htmlis mainly used for microwave baking and baking processing of food products such as agricultural products, non-staple foods, aquatic products, whole grains and meat products.

Food microwave baking machine features:

1. Microwave baking efficiency is high and heating speed is fast.

2, can effectively maintain the original flavor and nutrients of the food, without changing the color of the food.

3, a multi-purpose machine. Multi-use products: dried fruit baking, peanuts, melon seeds, fish and shrimp, roast duck / chicken, whole grains baking, etc.; use for more: can be used for food baking, but also for food sterilization, heating, curing, puffing, Thaw, bake, etc.

4, food baking accompanied by sterilization treatment. It can extend the shelf life of foods and maximize their nutritional content.

5, the equipment is fully automated intelligent assembly line baking, easy to operate.

6, environmental protection, energy conservation, and health. No residual heat radiation, no dust, no noise, no pollution, easy to achieve food hygiene testing standards.

According to the baking requirements of different foods, our company has specially developed a variety of food baking machines: 1, microwave infrared baking machine, the equipment components are composed of microwave baking part and infrared baking part, tunnel assembly line structure, all Automatic conveyor belt conveying baking, microwave baking and infrared baking combination, according to the required baking process, microwave and infrared simultaneously open baking, microwave or infrared baking alone; 2, microwave light wave baking machine; 3, microwave ultraviolet baking sterilization machine; 4, microwave hot air baking equipment and so on.

my website：https://www.nuts-machine.com/Products/12.html

With the continuous development of society, people pay more and more attention to the protection of the environment, and at the same time, resources are recycled. More and more people are investing in new charcoal machines. Then these s want to invest in new charcoal machines. Produce a good mechanism of charcoal, and improve the production efficiency of the mechanism charcoal, then the production efficiency of the new charcoal machine is related to temperature?

The charcoal rate of the new charcoal machine differs depending on the type of raw materials. The wood fiber content of the raw material has a positive effect on the yield of charcoal. Density materials can also generally produce dense and robust mechanical charcoal. Although the lower carbonization temperature gives higher carbon removal rate, charcoal is low in quality and corrosive, contains acidic tar substances, and cannot be burned in a clean smokeless flame. The solid carbon content of high-quality commercial carbon should be higher than 80%, which requires us to control the final carbonization temperature above 500 °C. However, as the carbonization temperature increases, the friability of charcoal will increase, and in actual production, when the final carbonization temperature is between 550 ° C and 650 ° C, the brittleness of the mechanism charcoal and solid carbon A desirable balance can be achieved between the contents.

The main products of the new charcoal machine series are: wood chip crusher, straw crusher, carbon powder forming machine, new type, large, medium and small energy-saving dryer, multi-function bar machine, environmentally friendly smokeless carbonization furnace and so on. The new charcoal machine equipment can saw sawdust, branches, rice husks, peanut shells, shavings, bamboo chips, bamboo dust, peanut skin, sunflower seed shell, furfural residue, wine residue, bagasse, corn cob, coconut shell, coffee shell and north and south After the crop straw is pulverized, it is shaped into a semi-finished carbon alloy by high temperature and high pressure plasticization of the forming machine, and carbonized by a carbonization furnace to form a finished charcoal. The carbon powder molding machine is a molding device that uses processed charcoal powder and coal powder as raw materials and is pressed into a rod shape or a cylindrical shape by stirring.

After the installation of the charcoal machine equipment, the load test of more than two hours is started to check whether the installation of the charcoal machine is stable, whether the components are flexible, and whether the equipment is operating abnormally. If there is any problem, it should be solved in time so that it will malfunction during production and affect production. It can be put into production after the load operation check is trouble free.

It can be understood from the above that the production efficiency and temperature of the new charcoal machine are closely related, and the quality of the new charcoal machine production mechanism is also related to the temperature, so the must strictly control the charcoal production mechanism when using the new charcoal machine. The temperature of the equipment is such that the production efficiency of the new charcoal machine and the quality of the mechanism charcoal can be improved and the economic benefits of the enterprise can be improved.

my website:http://www.charcoal-machines.com/sawdust-charcoal-briquette-production-line

Fryer adaptation range:
First, pasta; twist, casserole, honey, honey three knives, fritters, hemp, gluten, Jiangmi, Shaqima, scorpion and so on.
Second, meat-like; pheasant (colored), plate duck (colored), braised pork, meatballs, beef jerky, pork belly, chicken legs, pig's trotters.
Third, nuts; peanuts, green beans, broad beans, sunflower seeds.
Fourth, soy products; dried bean curd, bean bubble, fish tofu, bean ginseng.
Five, seafood; all kinds of fish, shrimp, scallops, sea red, small fish, squid, squid.
Sixth, other categories; vegetable cakes, Tianfuluo, eggplant boxes, kneading, hanging paste and paste all kinds of fried puffed food.
Made with new technology and advanced technology;
1. Automatic temperature control, uniform heating, constant temperature, and food nutrition:
2. Using the principle of “oil-water separation”, the residue in the frying oil is automatically filtered out to ensure that the frying oil is clean and the frying oil can be used for a long time without blackening.
3, a multi-purpose machine, can continuously fry a variety of food, not odor
4, no fumes, to ensure the health of the operator:
5. The “oil-water separation” fryer is easy to operate and can be operated by one person.
6, the machine energy-saving 50%, fuel economy 40%, is the company through the introduction, digestion and absorption of foreign advanced technology, research and development of a fuel-efficient, environmentally friendly, sanitary, practical high-tech food equipment.

my website: http://www.potatochipprocessing.com/dehydrator.html

People's living standards have increased, and the demand for various food and snack foods has increased. Many foods, especially snack foods, are inseparable from the process of frying. So what are the ways to fry?

Deep-fried is mainly made up of whole-oil frying and oil-water separation frying technology. The basis for this is the difference in the method of slag removal.

The slag removal of the whole oil fry is mainly dynamic automatic filter slag removal, that is, the motor is used to dynamically circulate the oil for filtration, and the other is to use the crawler scraping with a separator.

Oil-water separation frying is oil-water mixed frying. We all know that after mixing oil and water, because of the difference in specific gravity, the oil is on top, the water is below, and the oil and water are separated and not mixed. Oil-water separation and frying is carried out by adding a heating pipe in the middle of the oil layer (the height from the water surface can be customized according to customer requirements), controlling the temperature of the upper and lower oil layers by heating from the middle of the oil layer, and using the boiling point of the oil water to make the fried water The dross in the land sinks to the bottom of the water to prevent carbonization of the dross and lower the oil quality. It is a static filtration method.

my website ：http://www.potatochipprocessing.com/

The fryer adopts water mixed filter residue structure and full oil longitudinal scraping or side scraping system, and frequency conversion speed regulation. When fried, the residue of the fried product sinks into the water below the oil sump, and the residue does not form carbon, and can be discharged through the drain valve along with the water. At the same time, a large amount of edible oil contained in the residue is separated by oil and water and returned to the oil layer. In this way, the oil life cycle is greatly extended, the oil consumption is reduced, the fuel saving effect is very obvious, and the color, fragrance and taste of the fried product are better, and the appearance is also more clean and beautiful. The machine setup enhances the system and allows the conveyor to be raised to an appropriate height, making it easy to clean and overhaul the machine. Suitable for s who need fried food for 30 seconds - 18 minutes. Fully automatic large-scale frying machine The whole machine is made of stainless steel, double mesh belt conveying products, frequency conversion speed regulation, fixed plate type mesh belt, preventing product floating, preventing deformation, automatic slagging of oil and water mixing or vertical oil scraping structure. With mesh belt turning mechanism, it can clean the floating residue in the oil and the residue on the mesh belt at any time, and automatically control the oil. It is a fragile and attractive stable appearance of the fried product. It is safe, convenient and hygienic. It is ideal for frying. device.

http://www.potatochipprocessing.com/

In recent years, charcoal machine equipment production mechanism charcoal has been widely used in various fields. Mechanism charcoal is the use of charcoal machine equipment to carbonaceous crops, sawdust, branches and other raw materials through high temperature and high pressure to squeeze these raw materials into an environmentally friendly mechanism charcoal. Mechanism charcoal can be sold because it has a very wide range of uses in various industries.

Industrial use: Suitable for purification of industrial production drinking water, raw water purification of power station boilers, air purification, automobile exhaust gas recovery, purification of precious metals and use as photocatalyst carrier; metallurgy: steelmaking, ironmaking reducing agent, steel ingot insulation, aluminum smelting Electrode; chemical: used for the production of carbon disulfide, calcium carbide, carbon tetrachloride, etc.; carbon plant, activated carbon plant, steel plant, copper plant, mosquito repellent plant, rubber plant, thermal insulation material plant, etc. The silicon plant needs 150,000 tons of charcoal for activated carbon.

Agricultural use: increase ground temperature: After applying charcoal powder in the soil, the black charcoal particles can absorb the solar heat energy, which can raise the soil temperature, promote seed germination and increase the germination rate. Improve soil and maintain soil moisture. Sustained release of pesticides and fertilizers (changing soil pH, increasing soil CO2 content, adsorbing harmful metals in soil, and improving microbial activity in soil).

Food use: used as food additives, food brewing, smoked tea, etc.; used for decolorization and refining of sugars such as sucrose, glucose, xylose, ribose, sucrose, lactose; food preservation, large freezer, refrigerator deodorant.

Uses in the pharmaceutical industry: for the decolorization, purification, refining of chemical reagents, biomedical raw materials and other products and the removal of "pyrogen" for injection injection.

Environmental protection, construction, and ceramics can be used as snow removers and desiccants, as well as special fillers for building concrete, insulating materials, and refractory materials. When firing ceramics, using a mechanical rod as a fuel can improve the quality of ceramic products.

Animal husbandry use: As a feed ixture, accelerate the growth and development of livestock and poultry, increase the digestion and disease resistance of livestock and poultry, and deodorize the corral.

Daily use: People often use charcoal for heating, barbecue, and shabu-shabu. Because of its smokeless taste, high calorific value and long burning time, it is more and more popular. There are numerous holes in the charcoal. These holes have the function of adsorbing various substances and releasing adsorbed substances. Therefore, people use it as a dehumidifying agent. When it is wet, charcoal absorbs moisture. When it is dry, it will release the absorbed moisture, which can effectively adjust the humidity. In addition, charcoal can also eliminate odors and harmful substances in the room. The porosity of charcoal can not only retain the water needed for plant roots, but also improve the permeability and drainage of soil, and provide a good living space for plant-friendly microorganisms. Therefore, it is mixed with 5%-10% in flower-potted soil. Bean-sized charcoal provides a healthy environment for plants, while garden trees enhance pest and disease resistance. Today's decoration concept has begun to pay attention to the characteristics of environmental protection, nature, health and humanity. Decorative charcoal, using a small space of pores, a bonsai is bred in a bauxite. Charcoal can help preserve food and use it as a deodorant on the refrigerator.

Charcoal machine equipment production mechanism Charcoal is widely used in the market, so its sales in the market is very wide, so investing in charcoal machine equipment production mechanism charcoal is very promising and can create a lot of wealth for s.

http://www.charcoal-machines.com/sawdust-charcoal-briquette-production-line

[url]Charcoal machine[/url]http://www.charcoal-machines.com/ equipment wants to produce good mechanism charcoal, raw materials and production technology are very important, and mechanical equipment is also important. In the charcoal machine equipment production mechanism charcoal, the main factor that can determine the appearance and quality of the mechanism charcoal is the propeller, so the When using charcoal machine equipment, pay more attention to the propeller to avoid malfunction and normal production.

The propeller in the charcoal machine (bar machine) is a component that causes headaches for many s. The propeller is easy to wear on the one hand, and the repair problem on the other hand. Is there any better way to increase the service life of the propeller? First of all, we all know that the technical requirements of the repair propeller are very high, and only by mastering the maintenance technology can the production be improved. Facet introduces the to the knowledge of repairing the rod pusher:

1. The quality of the welding materials used is too short, resulting in too short a time. Because of the wear resistance and high temperature resistance, the welding rods generally used in the market are generally about five to ten hours. It is necessary to use good materials. Good materials such as welding can be used for more than 100 hours.

2, the welding process is not good, the vast majority of the market is welded by electric welding, the longest to date only about 30 hours, because welding can not solve a high temperature problem, and wear-resistant materials are difficult during welding Evenly dissolved into steel.

3, due to different materials to use different compression ratio, this is a lot of propellers do not know what the problem, the axis is also positive, and not worn, the first day is good, but the next day will not work, can not do a great foundation the reason. The fineness and softness of the material have different requirements for the thruster. In general, the compression ratio of the mixed wood is small, and the compression ratio of the fir is large. This is why many people say that the sawdust of the fir is not worth the money. This requires the production staff to judge based on experience and materials, preferably a factory. To be equipped with a variety of materials, the various materials should be largely separated.

In the process of using charcoal machine equipment to produce charcoal, the propeller plays a very important role in it, which can determine the quality of the mechanism charcoal, so the charcoal machine propeller should be routinely maintained to avoid excessive wear and tear. It can affect the production of mechanical charcoal and affect the quality of the mechanism charcoal.

http://www.charcoal-machines.com/

The charcoal machine equipment adopts the principle and experience of rural wood burning, and with the technology of the current technology, after years of innovation and experimentation, a new generation of charcoal machine equipment has been developed, which is a new generation of equipment on the market. It adopts advanced production technology and uses a wide range of raw materials: wood chips, sawdust, rice husks, husks, branches and other materials with high carbon content, and it has great advantages and characteristics compared with the original equipment.


1. Fast carbonization: using the technology of no-burning kiln, 24-hour water production, can be transferred to the production site at will;

2, high output: For a set of equipment, we have Nissan 800 kg, 1000 kg, 1500 kg, 2000 kg and other models;

3, the amount of maintenance is small: the equipment only needs to be repaired about half a time;

4, low power consumption: the average power consumption per device production is 5.5 kW / hour;

5, the operation is simple and convenient: only two simple operation procedures can be used to produce beautiful products, and the equipment can be shipped normally within three days after installation;

The replacement of charcoal machine equipment is the trend of the times. The new charcoal machine is energy-saving and environmentally friendly, and it is smoke-free and dust-free. Bringing the gospel to the SMEs and the family-run charcoal factory. It has become an ideal investment project for all forestry plants, plate factories, grain processing plants, individual families, and laid-off reemployed people to get rich quickly.

The new generation of charcoal machine equipment has high production efficiency, good quality of charcoal produced, and energy saving and environmental protection. This advantage has led many s to invest in charcoal machine equipment to produce charcoal, and created a lot of The economic benefits, so the development prospects of charcoal machine equipment in the market has always been ahead of other equipment.

http://www.charcoal-machines.com/sawdust-charcoal-briquette-production-line

Charcoal machine equipment is not only a piece of equipment, charcoal machine equipment is the general term for the production mechanism of charcoal production line equipment. The price of the whole set of equipment of charcoal machine is matched according to the needs of s. The higher the output, the more ing equipment of charcoal machine equipment. The more the quantity, the more the investment will increase. This is all about the need to purchase charcoal machine equipment according to the needs of s.

The complete equipment of charcoal machine includes: pulverizer, dryer and bar machine, and the [url]carbonization furnace[/url]http://www.charcoal-machines.com/continuous-carbonization-furnace.html can also choose the bandit for production. However, due to the strictness of the national environmental protection requirements, the earth kiln is slowly needed to be ours. The smokeless [url]carbonization furnace[/url]http://www.charcoal-machines.com/continuous-carbonization-furnace.html is replaced, and the crusher is selected according to the customer's raw materials. The price of different equipment is also different. In addition, for us, selling equipment is not the key, important is technology and after-sales service, charcoal machine equipment. The appreciation of waste wood chips into gold charcoal is sold all over the world, which fully reflects the one-stop service that our factory has realized, supply and sales. The equipment to be bought depends on the technology provided by the manufacturer. Can you visit the factory and visit the factory for production? In fact, it is also good to compare several.

As many countries are increasingly demanding sustainable development, only environmentally friendly equipment can be put into production. At the same time, environmentally-friendly equipment is also a government-ed project, and there is no worries about the use and sale of finished products. So what are the advantages of charcoal machine equipment, so that it will become a government project.

[url]Peanut sheller[/url]https://www.nuts-machine.com/Products/29.html maintenance operation, I hope to help you in the maintenance of peanut sheller:

    1. Anti-corretion: The peanut peeling machine in repair must use the triangle wood to lock the tires of the car. After the jack is jacked up, it should also be ed by the ing tools; before relaxing the jack, pay attention to whether there are people and obstacles next to it.

    2, anti-shock: the electrical equipment of the peanut sheller should be reliably grounded, the switch equipment should be higher than the head, the wire should be replaced or damaged in time to prevent electric shock or fire.

    3, anti-corrosion: the electrolyte of the peanut sheller battery should be used, ceramic or glass containers should be used. When checking the electrolyte height and density, do not let the electrolyte splash on clothes or skin.

We have a complete management system, exquisite technical capabilities and 100% product service. Therefore, it is the most popular company for our customers. Shuliy Machinery introduces the structure and advantages of peanut roaster:

     The [url]peanut roasting machine[/url]https://www.nuts-machine.com/Products/12.html is mainly composed of a speed regulating motor, a baking pan, a discharging cage, etc. The roasted peanuts in the production process are poured out through the discharging cage, and the salt as a heat medium is left in the rotating pot. Continue to heat, a lot of energy savings. After use, the machine is energy efficient, safe and hygienic. The roasted peanuts are beautiful in color and taste good.

     If you have any questions about the above information, please us and we will give you a professional answer.

Although it is rare for wood shredders to have difficulty in starting up, it does not mean that it does not happen. Therefore, how to prevent the start-up difficulty of wood shredders is also necessary. So let's first understand why the startup is difficult:

    1. No lubrication or lubrication is not in place

    Like other machines, wood shredders require frequent lubrication with grease. It should be pointed out here that when choosing grease, we should choose those with higher viscosity and good lubrication. Grease can reduce the damage caused to the wood shredder due to machine friction.

    2. Long-term operation

Whether it is a wood shredder or other machines, there is a common feature that long-term operation can cause damage to the machine. Among these damages, one of them is the difficulty of starting. Therefore, it is very necessary to arrange the wood shredder for scientific and reasonable production. People often say that you think I am a machine and don't need a break. In fact, the machine also needs rest, but we have not paid attention to this for a long time.

    3. Bearing gland is excessively worn

    Excessive wear of the wood shredder bearing gland can also cause difficulty in starting. This is because the bearing gland is excessively worn, which can affect the dust collector. Once the precipitator is affected, the large amount of dust generated by the wood shredder during operation is doped into the hydraulic system. If there is too much dust in the hydraulic system, the lubricating performance of the lubricating oil will be degraded or even deteriorated, which will make the wood shredder difficult to start and work properly.

    The reason why the wood shredder is difficult to start is now known, so how can we prevent it?

    First, let the staff strengthen the inspection of the wood shredder, find out the abnormal situation in time, and even the manufacturer directly to avoid the problem;

    Second, strengthen daily maintenance and maintenance work to ensure that the wood shredder is in good working condition;

    Third, above the feed opening of the wood shredder, the feed rate is stabilized and the volume of the feed material is symmetrical;

    Fourth, select a grease with a high viscosity and good lubrication effect;

    Fifth, rationally arrange the working hours of the wood shredder to avoid excessive work;

    Sixth, after the wood shredder is finished, it should be idling for a period of time to completely remove the materials in the wood shredder bin.

    If you are unable to start the wood shredder during production or for other reasons, and you can't solve it yourself, you can always our technicians. They will provide you with technical and even come to your door to solve your problems.

http://www.charcoal-machines.com/sawdust-charcoal-briquette-production-line

How to use the [url]charcoal machine production line[/url]http://www.charcoal-machines.com/charcoal-briquette-production-line, and what factors are involved in the process of using the charcoal machine production line? Then the charcoal machine production line is also turning waste into treasure and realizing recycling and recycling in the process of producing charcoal. This is also a very profitable project.

The charcoal machine production line fills the raw materials containing biomass fibers that can produce charcoal, such as branches, straw, straw, peanut shells, trunks, cotton straw, tea seed husks, husks, weeds, leaves, etc., and is pulverized into 10 mm by a pulverizer. The powder inside is dried by a dryer to make the moisture content within 12%. After being put into the rod machine through high temperature and high pressure, it is formed (without any additives) and then put into a carbonization furnace for carbonization. charcoal. It is also possible to carbonize the material powder directly into a carbon powder using a continuous carbonization furnace at a high temperature.

The production activity of the charcoal machine production line is inseparable from the high temperature. When the mechanism carbon is molded, it needs to be extruded under the environment of high temperature and high pressure. It is completed by the heating coil of the charcoal machine production line, and is heated by the heating ring. 260-350 degrees Celsius, in order to ensure that the mechanism of carbon rods produced to achieve the required density, the point to pay attention to is to preheat the charcoal machine production line after the mechanism carbon molding and then discharge the material for production and processing. The mechanism of charcoal produced depends on the equipment and process, and depends on the size of the water contained in the raw materials. Generally, the moisture content of the raw material is less than 12%, but it is also greater than 6%, so as to greatly avoid the resulting salary bar being easily broken due to excessive moisture content.

These are just some of the details in the process of making rods in the charcoal machine production line, and they are also a key part. The good and bad of the rods also affect the effect of carbonization in the future. Therefore, in every production process, we must judge according to the production experience. Adjust so that you can get a better product.

The above are the factors that need attention in the process of producing charcoal in the charcoal machine production line, which can affect the quality of the mechanism charcoal and the production efficiency of the charcoal machine production line, and indirectly affect the 's economic benefits.

website:http://www.charcoal-machines.com/charcoal-briquette-production-line

Shuliy mechanical fryer assembly line daily use maintenance matters
Fryer line equipment operation sequence:
1. Cleaning: Clean the hard objects and residues in the fryer line and in the pipeline.
2. Trial operation: Open the scraping belt, the upper and lower mesh belts, the lifting, the exhaust fan and the circulating pump in turn, observe the running direction of the equipment, whether there is any stuck phenomenon and whether there is leakage.
3. Refueling: completely clean the water and hard residue in the inside of the pot and in the pipeline before refueling. Refuel to cover 30-50mm above the lower mesh belt (add cooking oil according to the actual situation of the fried product).
4. Heating: Ensure the oil level to cover the lower mesh belt before heating.
5, operation: switch heating control to carry out heating, set the frying temperature as needed. When the set temperature is reached, it can be fried.
6. Turn on the exhaust fan, scraper belt, upper and lower mesh belt and circulation pump in turn.
7. Check pipes, valves, and open circulating pumps.
Special safety note:
★ coarse filter: Lift once every half hour.
★The slag box is connected: it is full and the residue is forbidden to stay in the equipment for more than 1 hour. The filter residue is placed in water and completely cooled and away from the equipment.
★ scraping belt: continue to run for 15-30 minutes after the end of production.
★ Lifting the mesh belt: After the frying is finished, the heating power is turned off, and the mesh belt bracket can be raised after 30 minutes. Prevent the residual heat of the heater from causing the residue to catch fire.
★Bumper: After the equipment is lifted into place, the bumper must be inserted before other equipment operations can be performed.
★Fire extinguishing system: After the safety pin of the solenoid valve is pulled out, the power supply of the fire extinguisher can not be cut off after the frying.
Daily maintenance of the fryer assembly line:
1. Tighten each bolt after each week of use, pay special attention to: AC or terminal block and chain and screw tightness.
2, equipment cleaning, refuse to use strong acid and strong alkali to clean frying equipment.
3, the equipment is cleaned once every two weeks, cleaning method: add water, add alkali or detergent, heat to about 50 degrees, the mesh belt starts running, cook for 60 minutes, use soft brush to clean the mesh belt, mesh belt bracket and Oily impurities on the surface of the pot. Drain the water gun to clean the attachments.
4. It is forbidden to spray with water gun at the electric control box and heating tube. The electric control box is cleaned every month to prevent short circuits.
5, the equipment does not have to clean the equipment thoroughly for a long time.

website:http://www.potatochipprocessing.com/category/products/potato-chips-processing

[url]Peanut roaster machine[/url]https://www.nuts-machine.com/Products/12.html adopts the principle of heat conduction and heat radiation, using natural gas or liquefied gas (gas) as heat source, far infrared radiant heating, equipped with intelligent electronic digital temperature control device to automatically regulate the temperature inside the machine, free and low temperature regulation, automatic program High, is a professional barbecue equipment for roasting white peanuts, spiced peanuts, original flower fruits and other granular foods. With the roaster machine, it is very convenient for our food industry, which is also not a flowering roaster machine. The following advantages:
1. The peanut roaster machine maximizes the effective volume, and the microcomputer temperature controller is accurate and reliable in temperature control.
2. Storage, heating, testing and drying are carried out in the absence of oxygen or in an inert atmosphere, so it will not oxidize.
3, peanut machine box closure elastic can be adjusted, the overall molding of silicone rubber door seal ring, to ensure high vacuum inside the box.
4. The studio is made of stainless steel (or wire drawing) to ensure the durability of the product.
5, tempered, bullet-proof double-glazed doors to observe the objects in the work room, at a glance.
6, the shortest heating time, shorter than the traditional vacuum peanut machine heating time.
The appearance of [url]peanut roaster machine[/url]https://www.nuts-machine.com/Products/12.html has greatly enriched our life. It has high temperature resistance, erosion resistance, fuel consumption, high heat efficiency, convenient movement, easy maintenance and wide application. It heats up quickly and averages the color and taste of the baked food. Well received. Its structure is relatively simple and easy to clean. The peanut roaster machine has the advantages of convenience, energy saving, durability and the like. The baked products are of good quality, hygienic and tasteful, and all can reach the export scale.

In the face of the increasingly fierce market competition, the requirements of s are constantly improving, and the development of society is beginning to move towards energy saving and greening. Every industry in the market must have an innovative spirit and give full play to technological innovation. It is the development trend of the future market.

With the strengthening of people's environmental awareness and the concern for the environment, various new environmentally-friendly mechanical equipments have also appeared on the market. New charcoal machines must keep up with new development trends and continue to provide customers with more applicability and more productive efficiency. High environmental protection equipment. The new charcoal machine has made outstanding contributions to technological upgrading with its excellent technology and innovative spirit. The new charcoal machine plays an important role in the future development of the carbon industry. Nowadays, the development of China's machinery and equipment industry is getting faster and faster. Especially the new charcoal machine in the carbon industry is the fastest growing, and its use brings convenience to people. And welfare, deeply ed and loved by s.

When making a new type of [url]charcoal machine[/url]http://www.charcoal-machines.com/, the higher the carbon content of charcoal, the higher the calorific value, and the three factors of raw material and charcoal process. It can also be said that it is determined by the chemical composition of charcoal. The burning time can be said to be chemical factors and physical factors, that is, the new charcoal machine. The quality of the new charcoal machine equipment is determined tly with the raw materials, not only the calorific value, but also the charcoal and The surface area of ​​the air is small to extend the burn time. This surface area includes the outer surface as well as the inner pores. It is a lot of voids inside the original charcoal. Although the calorific value is comparable to that of the mechanism charcoal, the burning time of the mechanism charcoal is the longest. The most important method for improving the charcoal burning time is 2, one is to improve the rod of the new charcoal machine. The machine uses the molding pressure of the original part, and then increases the density and strength of the rod. The second is the carbonization furnace of the new charcoal machine equipment. By increasing the final carbonization temperature of the carbonization furnace, and slowing down the temperature of the heating and cooling, the carbon density is high. , high hardness. In the selection of equipment, it is preferred to use a new type of charcoal machine with reasonable design and reasonable design. Especially in the selection of carbonization furnace, it is necessary to pay attention to the actual amount of material in the product and then refer to the wall thickness of the [url]carbonization furnace[/url]http://www.charcoal-machines.com/continuous-carbonization-furnace.html for factory screening.

Energy conservation and environmental protection is the mainstream of the development of new charcoal machines in the future. New charcoal machines on the market must work hard in environmental protection, protect the ecological environment, and produce more environmentally friendly products, so as to promote the development of energy conservation and environmental protection in China and promote sustainable development. Economic progress.

The establishment of a [url]charcoal making machine[/url]http://www.charcoal-machines.com/charcoal-briquette-production-line manufacturer has a small investment, low threshold and fast return. At the same time, many countries have great for this project. These have promoted the rapid development of charcoal machines. The investment in the charcoal machine market has seen a hot scene. But these favorable factors do not adapt to such s. Must invest in combination with their own conditions and the surrounding environment. In this way, you can get rich.

      In addition to pursuing the quality of charcoal machines, the main reason is the life of charcoal machines. Because only long-lived charcoal machines can continue to create profits for s. At the same time, it can reduce costs.

1. After the long-term work of the charcoal machine, it is necessary to repair the pulley of the motor, whether to add the oil, whether to clean the dirt and so on.

2, sometimes the charcoal machine will cause loose belt after long-term work, then the speed of the charcoal machine will be reduced a lot. The long-term work output is not caused by this reason, so it is necessary to do a good job of checking the belt tightness. .

3. When checking the working of the motor, whether there is a large load, and working with the load for a long time will damage the motor, thus affecting the working efficiency of the whole machine.

website:http://www.charcoal-machines.com/charcoal-briquette-production-line

Microwave baking equipment is different from traditional baking equipment. The air around the food in microwave baking is room temperature and is not heated by microwave. The heat is generated by the interaction of charged particles and polar molecules in food. The heat generated is transmitted through the food material.

Since heat is generated inside the food, the heating rate in the microwave device is very fast. Since microwave heating is a process of heating peanuts as a whole, there is no need to heat the peanuts by heat conduction. Therefore, the microwave peanut roaster machine has a lower temperature when roasting peanuts (120-130 ° C, and the conventional baking equipment) Need 180-200 ° C).

Compared with the conventional baking processing method, the microwave [url]peanut roaster machine[/url]https://www.nuts-machine.com/Products/12.html has a much faster temperature rise during baking, so that the total baking time is shortened, thereby saving energy. Another advantage of using microwaves to bake peanuts is that the end products contain higher nutritional value than products processed by conventional baking methods.