NewStats: 3,264,446 , 8,183,743 topics. Date: Wednesday, 11 June 2025 at 06:52 AM 3i5537

Bekeee:


Please can you assist . I am in Lagos

I saw your mail and responded to it.
You can call 07089030689 so we can talk better.

Good day bosses here,I realized recently that my car battery doesn’t charger whenever I put on my AIR CONDITIONER because whenever my air conditioner is on my car would only work for few 15 to 20mins before my car battery low I will need to use another battery to start my car again,please my oga in the house what do you think might be wrong? Do you think my car battery is losing life span and I will need to get a new car battery? my car is Camry 2013.thank you

Joseph77200:
Good day bosses here,I realized recently that my car battery doesn’t charger whenever I put on my AIR CONDITIONER because whenever my air conditioner is on my car would only work for few 15 to 20mins before my car battery low I will need to use another battery to start my car again,please my oga in the house what do you think might be wrong? Do you think my car battery is losing life span and I will need to get a new car battery? my car is Camry 2013.thank you

Possibly a bad or weak alternator.
Take readings with a multimeter on DC volts from the battery terminals with your AC on full blast, lights on high beam, radio on, wiper on, and all electrical loads in your car powered on. If you get a 12.7v or below reading, your alternator is likely on it's way out or dead already. Ask someone to help keep a steady rev at 2,000 RPM with all accessories powered up and see if the reading improves to above 13V. If it doesn't, do not throw the alternator out yet. Take same reading from the alternator post and compare with what you got at the battery terminals. If it's same, then you have a charging issue. If it's higher from the alternator post, then you have issues with your transmission line from alternator to battery.

Guys greetings. Please I urgently need help. The gear shifter of my 2000 old model CR-V surprisingly broke as I was trying to put it on park. Please can this be worked cos as it stands I can't drive the car as no way to select gear. Your advice

jceesquare:

I saw your mail and responded to it.
You can call 07089030689 so we can talk better.

Thanks will call tomorrow 🙏

ckc:
Guys greetings. Please I urgently need help. The gear shifter of my 2000 old model CR-V surprisingly broke as I was trying to put it on park. Please can this be worked cos as it stands I can't drive the car as no way to select gear. Your advice

Replace the selector. You can easily get then from part sellers or dismantlers aka butchers aka mgbuka.

Is not something complicated and expensive is it?

kingreign:


Replace the selector. You can easily get then from part sellers or dismantlers aka butchers aka mgbuka.

ckc:
Is not something complicated and expensive is it?

I don't know. But I believe it's something that won't break your bank .

kingreign:


I don't know. But I believe it's something that won't break your bank .

ok thanks

Please I notice anytime I switch on my ac, my car tends to vibrate when not in motion and kinda drags when I'm about to move. If I want to slow down, it does as if it wants to go off. It actually went off when the rpm was low. What could be the cause.

And I also notice in the morning my car ac works but later brings in air from the vent and would not be cold. But in the afternoon, it gets cold very well. Please I need solutions to this two things. Thank you

Topnotch16:


Osun state

https://x.com/wanjohn1?s=21&t=uM-Sc7jqGAFU_w6Hw_ugIw

Check this guy out

Good morning house.

Please which engine oil is best for my Toyota Camry 2007 4 plugs?

Please guys I need a little assistance. My bushing that came with my car had a little tear and my mechanic advised I changed it now the one he bought now has cut in less that a month infact it cut completely that the car starts making sounds when it enters gallop

Please what is a lasting solution to this please I need advice as I have to fix this next week.

Note I’m in Lagos car is Honda Accord 2008 4 plug

Thanks

Please can anyone help with the major issues i am having with the rear?

Once i enter into a gallop or bump it swarves to the left and right.

Please ehat part exactly do i replace at the rear?

I just want to know the specific so i dont end up wasting money changing what i should not.

Its a Honda CRV 03.

Thanks guys.

My Benz C200, W203, M111 Kompressor engine is consuming a lot of fuel, please what could be the problem?

omochelsea004:
My Benz C200, W203, M111 Kompressor engine is consuming a lot of fuel, please what could be the problem?

A scan will reveal the cause of the problem

omotolsy:
Please can anyone help with the major issues i am having with the rear?

Once i enter into a gallop or bump it swarves to the left and right.

Please ehat part exactly do i replace at the rear?

I just want to know the specific so i dont end up wasting money changing what i should not.

Its a Honda CRV 03.

Thanks guys.

You have one or more control arm bushings, shock absorbers worn out or damaged. Have a competent technician carefully check and reveal the cause.

Thank boss I really appreciate
I got 12.72 from the battery terminal when my car was not powered on and 13.74 when it was powered on
What do you think boss with this info

Joseph77200:
Thank boss I really appreciate
I got 12.72 from the battery terminal when my car was not powered on and 13.74 when it was powered on
What do you think boss with this info

It's fine.

I need help with these codes so I can direct my Kazeem to fix. Nissan Xterra


1. P0430 - Catalyst System Efficiency below threshold Bank 2.

2. P0455 - Evaporative Emission system leak detected ( Large Leak )

3. P0037 - HO2S Heater Control Circuit low bank 1 sensor 2

4. P0327 - knock sensor 1 circuit low bank 1 or single sensor

5. P0328 - Knock Sensor 1 Circuit High Bank 1 or single sensor

6. P0128 - Coolant Thermostat

7. P0138 - O2 Sensor Circuit High Voltage Bank 1 sensor 2

Pls I nee ur help.

My Camry 2003. Sometimes show oil light wen am inside traffic or if I slow down this mostly happens anytime I drive the car may like 10mins. Anytime I slow time or inside traffic the light will show, but wen the the road is free Andi keep moving or speeding the light will not show. Each time I check my oil level, the Oil is always well guaged. Yesterday I took it to mechanic, he called the rewire man, the man said it is the Oil switch, I gave him 4500. He he show me, and ad fixed it, He drove the car ad come bk and said the light will not show again. I drove the car bk home I almost enter my house compound wen the light begin to show again..


Pls I need serious, it's really giving me headache

Originality007:
Pls I nee ur help.

My Camry 2003. Sometimes show oil light wen am inside traffic or if I slow down this mostly happens anytime I drive the car may like 10mins. Anytime I slow time or inside traffic the light will show, but wen the the road is free Andi keep moving or speeding the light will not show. Each time I check my oil level, the Oil is always well guaged. Yesterday I took it to mechanic, he called the rewire man, the man said it is the Oil switch, I gave him 4500. He he show me, and ad fixed it, He drove the car ad come bk and said the light will not show again. I drove the car bk home I almost enter my house compound wen the light begin to show again..


Pls I need serious, it's really giving me headache

You dey risk your 650k for toks engine.

Possible reasons?

1. Sludge on the oil screen/oil pump filter
2. Faulty oil pump

Have you scanned the car?

Don't bother driving the car until you change the oil pump or clean the oil pump screen

tayo85:
I need help with these codes so I can direct my Kazeem to fix. Nissan Xterra


1. P0430 - Catalyst System Efficiency below threshold Bank 2.

2. P0455 - Evaporative Emission system leak detected ( Large Leak )

3. P0037 - HO2S Heater Control Circuit low bank 1 sensor 2

4. P0327 - knock sensor 1 circuit low bank 1 or single sensor

5. P0328 - Knock Sensor 1 Circuit High Bank 1 or single sensor

6. P0128 - Coolant Thermostat

7. P0138 - O2 Sensor Circuit High Voltage Bank 1 sensor 2

1. Replace catalyst or get spacer that will work for your car.
2. Good luck searching for leaks.
3, 4, 5, 7. Test and replace sensor if bad
6. Replace thermostat.

Dozieson:


You dey risk your 650k for toks engine.

Possible reasons?

1. Sludge on the oil screen/oil pump filter
2. Faulty oil pump

Have you scanned the car?

Don't bother driving the car until you change the oil pump or clean the oil pump screen

Tor!
2AZ don reach 650k?

Car Scanner ELM OBD2
DTC report
Selected brand: Toyota

============1==============
P2716
Raw code: 2716
ECU: 10
Status: Confirmed
Transmission fluid pressure (TFP) solenoid D - electrical

============2==============
P0328
Raw code: 0328
ECU: 10
Status: Confirmed
Knock sensor (KS) 1, bank 1 - high input
Knock Sensor 1 High Input

============3==============
P0037
Raw code: 0037
ECU: 10
Status: Confirmed
Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit low
Oxygen Sensor Heater Circuit Low Input (Bank 1, Sensor 2)

============4==============
P0031
Raw code: 0031
ECU: 10
Status: Confirmed
Heated oxygen sensor (HO2S) 1, bank 1, heater control - circuit low
Oxygen Sensor Heater Circuit Low Input (Bank 1, Sensor 1)

============5==============
P2716
Raw code: 2716
ECU: 10
Status: Pending
Transmission fluid pressure (TFP) solenoid D - electrical

============6==============
P0328
Raw code: 0328
ECU: 10
Status: Pending
Knock sensor (KS) 1, bank 1 - high input
Knock Sensor 1 High Input

============7==============
P0037
Raw code: 0037
ECU: 10
Status: Pending
Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit low
Oxygen Sensor Heater Circuit Low Input (Bank 1, Sensor 2)

============8==============
P0031
Raw code: 0031
ECU: 10
Status: Pending
Heated oxygen sensor (HO2S) 1, bank 1, heater control - circuit low
Oxygen Sensor Heater Circuit Low Input (Bank 1, Sensor 1)

============9==============
P2716
Raw code: 2716
ECU: 10
Status: Confirmed
Transmission fluid pressure (TFP) solenoid D - electrical

============10==============
P0328
Raw code: 0328
ECU: 10
Status: Confirmed
Knock sensor (KS) 1, bank 1 - high input
Knock Sensor 1 High Input

============11==============
P0037
Raw code: 0037
ECU: 10
Status: Confirmed
Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit low
Oxygen Sensor Heater Circuit Low Input (Bank 1, Sensor 2)

============12==============
P0031
Raw code: 0031
ECU: 10
Status: Confirmed
Heated oxygen sensor (HO2S) 1, bank 1, heater control - circuit low
Oxygen Sensor Heater Circuit Low Input (Bank 1, Sensor 1)



Good day, please I need help with this codes.. I scanned my toyota corrola 2006 myself and got this coded, also when I accelerate up to 50mpg on third mainland bridge acceleration stops, like I have to leave it to drop down to 20 before I can accelerate again

Plz house help out I would really appreciate if I can get a good transmission mechanic also

jceesquare:

Tor!
2AZ don reach 650k?

Yes o

Hello house. Good afternoon

Pls isn't it possible to replace shaft seal?
The car leaks oil. Mechanic said it's the shaft seal. He has replaced it but it still leaks.

Abi na him no sabi do am??
It's a Ford Edge

I need help pls.
I'm in Benin

Hello House,

I noticed a vibration on my car anytime when i want to move, the vibration is from the enger side at the front.

Shaft and all the ts have been checked still same.

What could be wrong?

SOmeone was saying maybe it is the gear

dennisbee:
Hello house. Good afternoon

Pls isn't it possible to replace shaft seal?
The car leaks oil. Mechanic said it's the shaft seal. He has replaced it but it still leaks.

Abi na him no sabi do am??
It's a Ford Edge

I need help pls.
I'm in Benin

Which of the side did he replace? Driver’s side or enger’s side? Is your Ford Edge 4WD or 2WD

Without nairaland. Una go dry up. Na nairaland fey give una prestige. See am now. Hahahahaha

Make nairaland no open 1 month.uma go dry up. Stupid idiots like kingreign,gazzuz,and the rest. Idiot s

I bought a brand new radiator for my Lexus RX330.
I told the mechanic that I need to buy coolant. He said I should use ONLY water for some time (like 3 months) before using coolant.
Please I need opinions on this because I don't know if a new radiator require only water first before using coolant.